Insulation Block Benzene Board Insertion Device

The thermal insulation block plug board device comprises a fixed frame placed horizontally, a pallet is placed horizontally on the frame of the fixed frame, a movable frame powered by a driving oil cylinder is embedded in the fixed frame, and a movable frame is provided on the movable frame for pushing the pallet The moving push plate teeth, a driving shaft system is arranged under one end of the fixed frame, the driving shaft system is connected with the driving equipment used to provide power, and a driven shaft system is arranged under the other end of the fixed frame, and the driving shaft system is connected with the driven shaft. The systems are connected by two transmission chains. The two transmission chains are located on the outer sides of the two long sides of the fixed frame and are parallel to the two long sides of the fixed frame. The sides are respectively connected with a transmission chain, and the benzene board tray is provided with a positioning groove for positioning the benzene board. It solves the complex structure, low production efficiency, unreliable operation and potential safety hazard for operators in the existing board board device. The problem.

The concrete small hollow block benzene board thermal insulation composite wall has a simple structure, and blocks are used as load-bearing walls and protective walls on the inside and outside of the outer wall respectively, the benzene board is sandwiched in the middle, and the knotted mesh is placed on the inside and outside of the external wall. The main technological process is: leveling the elastic wire, arranging the blocks, laying the outer side of the outer wall, inserting the board, placing the mesh that is tied with the outer wall, and finally laying the inner side of the outer wall. This process is repeated continuously. During construction, attention should be paid to the treatment of block benzene board composite thermal insulation walls, core columns and special parts.